AMS 5596 - SAE AMS 5596 M-2017

牌号	AMS 5596
对应标准	SAE AMS 5596 M-2017 镍合金，耐腐蚀和耐热，薄板，带材，箔材和板材 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate, 52.5Ni - 19Cr - 3.0Mo - 5.1 Cb (Nb) - 0.90Ti - 0.50AI - 18Fe, Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968°C) Solution Heat Treated
归类	合金钢

AMS 5596 化学元素成分含量(%)

成分	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	Nb	B	Co	Al	Ta	更多
最小值	-	-	-	-	-	17	50	-	2.8	0.65	4.75	-	-	0.2	-	Fe余量
最大值	0.08	0.35	0.35	0.015	0.015	21	55	0.3	3.3	1.15	5.5	0.006	1	0.8	0.05	Fe余量

AMS 5596 机械性能

厚度 t mm	热处理或状态	抗拉强度 σ_b Mpa	屈服点 σ_s Mpa	断后伸长率或延伸率 δ %	硬度 HBW
t≤0.01	As Solution	≤965		report
0.01＜t≤0.1874	As Solution	≤965		≥30	HRB ≤102
0.1874＜t≤1.00	As Solution	≤1034		≥30	HRC ≥25
t≤0.25	After Precipitation/At Room Temperature	≥1241	≥1034	report
0.25＜t≤25.4	After Precipitation/At Room Temperature	≥1241	≥1034	≥12
t≤0.64	After Precipitation/At 649 °C	≥965	≥793	≥5
0.64＜t≤25.4	After Precipitation/At 649 °C	≥1000	≥827	≥5

注1：Elongation in 2 Inches or 4D.
注2：At Room Temperature：Determined in accordance with ASTM E8/E8M.
注3：At 1200 °F (649 °C)：Determined in accordance with ASTM E21 on specimens heated to 1200 °F 土5 °F (649 °C 士3 °C) , held at heat for not less than 20 minutes before testing, and tested at 1200 ° F 士5 °F (649 °C 士3 °C) .

材料牌号对应供应商

告诉我在“材数库”看到，将给您优惠

上海亚螺精密紧固技术有限公司

主营: 各类不锈钢紧固件各类合金钢紧固件特殊材质紧固件螺塞/堵头耐高温不锈钢紧固件 A4-80螺栓

联系人：徐海
移动电话： 18621311857
电话：021-59766477

询价

注：数据仅供参考！如有疑问，请填写"我要纠错"！