牌号 | X2CrNiN 18-10 |
德国W-Nr. | 1.4311 |
对应标准 | DIN EN 10269-2014
规定高温和/或低温性能的紧固件用钢和镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
归类 | 奥氏体不锈钢 |
性能 | 耐腐蚀 |
说明 | —本欧洲标准规定了非合金和合金(包括不锈钢)钢和镍合金制成的在高温和/或低温下具有指定性能的紧固件的半成品、棒材的要求。 —本标准的要求也适用于成品紧固件 —EN 10021中的一般交货技术条件也适用于按照本标准提供的产品。 |
密度 | 7.85 g/cm3 |
Material designation | Heat treatment condition | Diameter d mm | Minimum 0.2%-proof strength Rp0.2 in MPa at a temperature (in°C) of: | |||||||||||||
Name | Number | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | ||
X2CrNiN18-10 | 1.4311 | +AT | d≤160 | 246 | 205 | 175 | 157 | 145 | 136 | 130 | 125 | 121 | 119 | 118 | - | - |
Material designation | Heat treatment condition | Diameter d mm | Minimum tensile strength Rm in MPa at a temperature (in°C) of: | |||||||||||||
Name | Number | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | ||
X2CrNiN18-10 | 1.4311 | +AT | d≤160 | 527 | 490 | 460 | 430 | 420 | 410 | 410 | - | - | - | - | - | - |
Material designation | Heat treatment condition | Diameter d mm | Minimum impact energy KV2inJ(ISO-V test piece) at a test temperature in°C of: | ||||||||||||||||
Name | Number | -270 | -196 | -160 | -140 | -120 | -110 | -100 | -90 | -80 | -70 | -60 | -50 | -40 | -20 | 0 | +20 | ||
X2CrNiN18-10 | 1.4311 | +AT | d≤160 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 |