首页 EN 10277-2 - 2008 光亮钢制品.交货技术条件.第2部分:一般工程用钢

光亮钢制品.交货技术条件.第2部分:一般工程用钢 EN 10277-2 - 2008

牌号 化学成分(质量分数%)
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S
最小值 0.12 - 0.6 - -
最大值 0.18 0.4 0.9 0.045 0.045
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo
最小值 0.32 - 0.5 - - - - -
最大值 0.39 0.4 0.8 0.045 0.045 0.4 0.4 0.1
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo
最小值 0.42 - 0.5 - - - - -
最大值 0.5 0.4 0.8 0.045 0.045 0.4 0.4 0.1
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo
最小值 0.37 - 0.5 - - - - -
最大值 0.44 0.4 0.8 0.045 0.045 0.4 0.4 0.1
牌号
欧标钢号
化学元素成分含量(%)
成分 P S N
最小值 - - -
最大值 0.045 0.045 0.12
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo
最小值 0.52 - 0.6 - - - - -
最大值 0.6 0.4 0.9 0.045 0.045 0.4 0.4 0.1
牌号
欧标钢号
化学元素成分含量(%)
成分 P S N
最小值 - - -
最大值 0.045 0.045 0.012
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cu
最小值 - - - - - -
最大值 0.2 0.55 1.6 0.03 0.03 0.55
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo
最小值 0.57 - 0.6 - - - - -
最大值 0.65 0.4 0.9 0.045 0.045 0.4 0.4 0.1
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S
最小值 0.07 - 0.3 - -
最大值 0.13 0.4 0.6 0.045 0.045
牌号
欧标钢号
化学元素成分含量(%)
成分 C Si Mn P S
最小值 0.12 - 0.3 - -
最大值 0.18 0.4 0.8 0.045 0.045
① Steels with improved machinability as a result of the addition of higher sulphur contents up to around 0,10 % S (including resulphurized steels with controlled inclusion content (e.g. Ca-treatment)) (modern method) or lead may be supplied on request. In the first case the upper limit for the manganese content may be increased by 0,15 %.
②Elements not quoted in this table shall not be added intentionally to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat. All reasonable precautions shall be taken to prevent the addition of such elements from scrap or other material used in the manufacture which affect the hardenability, mechanical properties and applicability.
牌号
欧标钢号
化学元素成分含量(%)
成分 C Mn P S Cu N
最小值 - - - - - -
最大值 0.17 1.4 0.04 0.04 0.55 0.012
替代列表
注:数据仅供参考,以官方原件为准!
© 2023 材数库