B36 C22000 - ASTM B36/B36M-2018

牌号	B36 C22000
对应标准	ASTM B36/B36M-2018 黄铜板材、带材和轧制棒材的标准规范 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
归类	铜及铜合金
标签	黄铜

B36 C22000 化学元素成分含量(%)

成分	Fe	Cu	Pb	更多
最小值	-	89	-	Zn：余量
最大值	0.05	91	0.05	Zn：余量

B36 C22000 机械性能

条件	热处理或状态	抗拉强度 σ_b Mpa	硬度 HBW
厚板, 轧制棒材, 薄板, 带材	热轧（M20）	230~295
厚板, 轧制棒材, 薄板, 带材；0.5≤t≤0.9	冷加工- 1/4 硬(H01)	275~345	HR(B Scale) 27~52
厚板, 轧制棒材, 薄板, 带材；t>0.9	冷加工- 1/4 硬(H01)	275~345	31~56
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	冷加工- 1/4 硬(H01)	275~345	HR(Superfical 30-T) 34~51
厚板, 轧制棒材, 薄板, 带材；t>0.7	冷加工- 1/4 硬(H01)	275~345	37~54
厚板, 轧制棒材, 薄板, 带材；0.5≤t≤0.9	冷加工- 1/2 硬(H02)	325~395	HR(B Scale) 50~63
厚板, 轧制棒材, 薄板, 带材；t>0.9	冷加工- 1/2 硬(H02)	325~395	53~66
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	冷加工- 1/2 硬(H02)	325~395	HR(Superfical 30-T) 50~59
厚板, 轧制棒材, 薄板, 带材；t>0.7	冷加工- 1/2 硬(H02)	325~395	52~61
厚板, 轧制棒材, 薄板, 带材；0.5≤t≤0.9	冷加工- 3/4 硬(H03)	355~425	HR(B Scale) 59~68
厚板, 轧制棒材, 薄板, 带材；t>0.9	冷加工- 3/4 硬(H03)	355~425	62~71
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	冷加工- 3/4 硬(H03)	355~425	HR(Superfical 30-T) 55~62
厚板, 轧制棒材, 薄板, 带材；t>0.7	冷加工- 3/4 硬(H03)	355~425	58~64
厚板, 轧制厚板棒材, 薄板, 带材；0.5≤t≤0.9	冷加工- 硬(H04)	395~455	HR(B Scale) 65~72
厚板, 轧制棒材, 薄板, 带材；t>0.9	冷加工- 硬(H04)	395~455	68~75
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	冷加工- 硬(H04)	395~455	HR(Superfical 30-T) 60~65
厚板, 轧制棒材, 薄板, 带材；t>0.7	冷加工- 硬(H04)	395~455	62~67
厚板, 轧制厚板棒材, 薄板, 带材；0.5≤t≤0.9	冷加工- 极硬(H06)	440~495	HR(B Scale) 72~77
厚板, 轧制棒材, 薄板, 带材；t>0.9	冷加工- 极硬(H06)	440~495	74~79
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	冷加工- 极硬(H06)	440~495	HR(Superfical 30-T) 64~68
厚板, 轧制棒材, 薄板, 带材；t>0.7	冷加工- 极硬(H06)	440~495	66~69
厚板, 轧制厚板棒材, 薄板, 带材；0.5≤t≤0.9	Cold-Worked Spring(H08)	475~530	HR(B Scale) 76~79
厚板, 轧制棒材, 薄板, 带材；t>0.9	Cold-Worked Spring(H08)	475~530	78~81
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	Cold-Worked Spring(H08)	475~530	HR(Superfical 30-T) 67~69
厚板, 轧制棒材, 薄板, 带材；t>0.7	Cold-Worked Spring(H08)	475~530	68~70
厚板, 轧制厚板棒材, 薄板, 带材；0.5≤t≤0.9	Cold-Worked extra Spring(H10)	495~550	HR(B Scale) 78~81
厚板, 轧制棒材, 薄板, 带材；t>0.9	Cold-Worked extra Spring(H10)	495~550	80~83
厚板, 轧制棒材, 薄板, 带材；0.3≤t≤0.7	Cold-Worked extra Spring(H10)	495~550	HR(Superfical 30-T) 68~70
厚板, 轧制棒材, 薄板, 带材；t>0.7	Cold-Worked extra Spring(H10)	495~550	69~71

t=材料厚度；单位mm

退火后获得满足平均晶粒尺寸的硬度表

举例说明：OS050表示退火后获得平均晶粒尺寸，字母OS后缀数字050表示平均晶粒尺寸0.05mm

注：数据仅供参考！如有疑问，请填写"我要纠错"！

退火后获得满足平均晶粒尺寸的硬度表