| 牌号 | 320S31 |
|---|---|
| 其他名称 | |
| 对应标准 | BS 1501-3-1990
承压用钢板-第3部分:耐蚀耐热钢 厚板，薄板及带材 Steels for Pressure Purposes — Part 3: Specification for Corrosion and Heat-Resisting Steels: Plates, Sheet and Strip |
| 归类 | 奥氏体不锈钢 |
| 说明 | • 非连续热轧板材的公差按BS EN 10029。厚度公差按B级，除非询价和订货时另有协议。 • 热轧宽带材（卷）、薄板公差按BS EN 10051； • 热轧窄带材公差按 BS EN 10048 • 冷轧带材（卷）（轧制宽度≥600mm）公差按BS EN 10259； • 冷轧窄带材（轧制宽度＜600mm）公差按BS EN 10258 |
-
高温Rp0.2，Rp1.0
钢号 Rp0.2min.
MPa
Rp0.2 min.
MPa ⓐ
20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 320S31ⓑ 210 165 150 137 128 122 117 112 109 105 102 100 97 96 Rp1.0 min. Rp1.0 min. 245 193 176 163 154 147 141 136 132 128 125 122 119 116 ⓐ For the steel types for which sufficient data were available, the proof stress values given were derived from data collected and assessed in accordance with BS 3920, using the smoothed lower 95 % confidence lines. For certain other steel types insufficient data were available and other bases were adopted.
ⓑ Values based on 316 smoothed lower 95 % confidence lines.
注：数据仅供参考！如有疑问，请填写"我要纠错"！