| 牌号 | X2CrNiN23-4 |
| 德国W-Nr. | 1.4362 |
| 标准 |
DIN EN 10296-2-2006
机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢 Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 2 Stainless Steel |
| 归类 | 双相不锈钢 |
| 标签 | 专利钢 |
-
热处理指南
Steel grade Heat treatment during fabrication and
further processingHot working during further
processing e.g. hot bendingName Number Solution anneailing
Temperature
℃ ①Type of
cooling ②Temperature
℃Type of
coolingX2CrNiN23-4 1.4362 950 to 1050 w or a or g 1150 to 950 a or g ◎ a=air; w=water; g=gas.
① When heat treatment forms part of further processing of the product. an attempt should be made to achieve the lower values of the range for solution annealing. lf hot working has been carried out at a temperature of at least 850 °C or if the product has been cold worked, the temperature used for subsequent solution annealing may be 20 °C less than the lower limit stipulated for solution annealing.
② Cooling should be sufficiently rapid.
长按二维码,关注材数库微信公众号