| 牌号 | ENiCr-C |
| W89606 | |
| 对应标准 | AWS A5.13/A5.13M-2010
堆焊焊条规范 保护金属电弧焊 Specification for Surfacing Electrodes for Shielded Metal Arc Welding |
| 归类 | 合金钢 |
| 标签 | 镍基堆焊焊条 |
| 说明 | Characteristics. Undiluted weld metal of this composition exhibits a structure consisting of chromium carbides and chromium borides in a nickel-rich matrix. The nickel base and high chromium content give these deposits good heat and corrosion resistance. Care should be taken when cooling hardfacing deposits because of a tendency to stress crack. This alloy possesses excellent resistance to low stress abrasion. Applications. ENiCr-C weld metal flows very easily, has very high abrasion resistance, and normally takes on a high polish. Typical applications include cultivator sweeps, plow shares, extrusion screws, pump sleeves, takes on a high polish. Typical applications include cultivator sweeps, plow shares, extrusion screws, pump sleeves, corrosion resistance and normally require grinding for finishing. Single layer deposits typically have a hardness of 35–45 HRC. Multilayer deposits typically have a hardness of 49–56 HRC. |
注：数据仅供参考！如有疑问，请填写"我要纠错"！