| 牌号 | ECoCr-A |
| W73006 | |
| 对应标准 | AWS A5.13/A5.13M-2010
堆焊焊条规范 保护金属电弧焊 Specification for Surfacing Electrodes for Shielded Metal Arc Welding |
| 归类 | 合金钢 |
| 标签 | 钴基堆焊焊条 |
| 说明 | Characteristics. Weld metal deposited by ECoCr-A electrodes is characterized by a hypoeutectic structure consisting of a network of about 13% eutectic chromium carbides distributed in a cobalt-chromium-tungsten solid solution matrix. The result is a material with a combination of overall resistance to low stress abrasive wear coupled with the necessary toughness to resist some degree of impact. Cobalt alloys also are inherently good for resisting metal-to-metal wear, particularly in high load situations that are prone to galling. The high alloy content of the matrix also affords excellent resistance to corrosion, oxidation, and elevated temperature retention of hot hardness up to a maximum of 1200°F [650°C]. These alloys are not subject to allotropic transformation and therefore do not lose their properties if the base metal subsequently is heat treated. Applications. The alloy is recommended for cases where wear is accompanied by elevated temperatures and where corrosion is involved, or both. Typical applications include automotive and fluid flow valves, chain saw guides, hot punches, shear blades, extruder screws, etc. |
注：数据仅供参考！如有疑问，请填写"我要纠错"！